- #CLOVER CONFIGURATOR ADD HDMI HOW TO#
- #CLOVER CONFIGURATOR ADD HDMI PATCH#
- #CLOVER CONFIGURATOR ADD HDMI CODE#
Many Coffee Lake iGPUs work fine without loading Apple GUC firmware or enabling RPS Control. Note about igfxfw and rps-control (thanks 5T33Z0) In this way, Intel UHD 630 is well installed and works fine on macOS.
force-online=01 is mandatory, to force online status on all displays. #CLOVER CONFIGURATOR ADD HDMI CODE#
Add in ist > DeviceProperties > Add the code below (note: BwCbPg= is 07009B3E in hexadecimal):. Enable it on the motherboard as main card: Initial Display Output IGFX instead of PCIe 1 Slot (this would be the final step). This card can also be configured to be the main or single one, so that it outputs a signal to the monitor and also encodes video. enable-metal=01 to enable Metal 3 in Ventura (recommendable on macOS 13). device-id=9B3E000 to be displayed as Intel UHD Graphics 630 instead of Kabylake Unknown (optional). AAPL,ig-platform-id=0300913E is mandatory, to detect the iGPU as Coffee Lake. To check if the VDA Decoder function is activated you can get Hackintool app ( Fully Supported or Failed in the first System tab). With these changes you can boot from a dGPU with the iGPU well installed. AwCRPg= in Base64 ( AAPL,ig-platform-id) = 0300913E in hexadecimal. This code has data values in Base64, in plist editors they can be seen as hexadecimal, e.g. You have to add in DeviceProperties > Add: Lilu and WhatEverGreen properly installed. There should be no cable between iGPU HDMI port and any type of display. iGPU and dGPU must be enabled in BIOS with dGPU as primary. This is important when using the iGPU as a main or single card but not when using it in headless mode. Index 3, BusID 0x04, Type HDMI (this is the active port, the only physical one, type is HDMI) Index 2, BusID 0x00, Type HDMI (type does not matter on this port) On this board there is only one HDMI v1.4 connector for the iGPU, it corresponds to index 3 in the theoretical list of 3 internal connectors this iGPU can have: Index 1, BusID 0x00, Type HDMI (type does not matter on this port) CPU (Coffee Lake Refresh, it is configured as Coffee Lake) with Intel UHD Graphics 630: PCI path is PciRoot(0x0)/Pci(0x2,0x0) My PC has a Z390 Aorus Elite board with an Intel 9th gen. Intel processor generation, different Intel generations have different iGPU IGPU setting depends on 2 factors: Motherboard because manufacturer can put 1, 2 or 3 HDMI connectors for the iGPU on the back pannel 
When this happens, we must configure the iGPU as headless mode (it is so called when it is enabled but no cable to monitor) so that the dGPU acts as main card but the iGPU is available for encoding / decoding video. When building a Hackintosh with both types of GPU we can find that, if the iGPU is not properly installed, video encoding can fail.
Macs with an integrated graphics card (iGPU) and a dedicated one (dGPU) use the iGPU for video encoding and decoding tasks. Desktop Coffee Lake chapter of the OpenCore Dortania's guide.
#CLOVER CONFIGURATOR ADD HDMI PATCH#
Framebuffer patch feature of headkaze's Hackintool app.General Framebuffer Patching Guide (HDMI Black Screen Problem) by CaseySJ in tonymacx86 forum.
i7 and i9) in headless mode (no cable to monitor) to be used by macOS (Catalina, Big Sur, Monterey or Ventura) in computing and video encoding tasks or setting it as the main card
#CLOVER CONFIGURATOR ADD HDMI HOW TO#
How to set the integrated graphics card Intel UHD Graphics 630 Coffee Lake R (9th gen. Intel UHD Graphics 630 Coffee Lake R on macOS
0 kommentar(er)
